@[email protected], this is the answer.

The important part is that its giving clean power to your hardware, and it only needs to last long enough to shut down nicely. Batteries in these units are usually just car or wheelchair batteries, so you can get them cheaper just as a regular battery too.

You can also grab an older UPS with a crapped out battery for cheap and swap the battery. Last time I did that I got the UPS for $10 (local pickup) and put a new battery in for $20 from Lowes. Battery is still solid, its been about 5 years for that one.

Worth taking a look at the battery - especially an old one on a repurposed device - before considering it safe. Spicy pillows happen.

US power sucks plenty!

Texas is an extreme example, but outages happen everywhere. It was only a bit over 10 years ago when Sandy basically hit half the US and took power out in the tristate area for weeks. With climate change making things worse…

But even when things are running well, not including the random downed line or busted transformers, its still better to give your hardware clean power and avoid the small spikes.

If I can, I buy direct downloads.

If I can’t do that, I’ll buy the CD (as long as its direct or a small label).

If I can’t, or its one of the big labels, I’ll find it elsewhere. I’d rather buy merch to support the artist directly than buy anything that goes through the big labels.

This is why Debian is my server of choice, and my work desktop of choice.

OP, There are some flavors of Debian out there that are more rapid release, like LMDE, Siduction, Sparky, even Kali (though I wouldn’t recommend Kali as a primary desktop personally). Some based on Sid, some based on Testing.

Dockge would be more appropriate for that.

Watchtower has different functionality, mainly keeping them up to date with images.

You want Jenkins, GH Actions, or even ansible.

Ooh, missed that one - thanks!

And I appreciate your choice (considering a good number of communities I enjoy are on your instance).

Personally I think anything prod level should be manual updates only anyway.

Do you have any recs on good solarpunk movies/documentaries?

Let’s see…

My servers (tiny/mini/micros) in total are about… 600W or so. Two NASs, about 15-20W a piece.

I spend a out $150/mo in electricity, but my hot water/HVAC/etc are the big power draw. I’d say about $40-50/mo is what I’m spending on powering the servers in my office.

Definitely puts off some heat, but that’s partially because it’s all in one rack, and I’ve got a bunch of other work hardware in there. It’s about 2 degrees warmer in my office than the rest of my home, but I also have air cycling all the time since it’s a single unit HVAC and I need to keep the air moving to keep it all the right temp in the other rooms anyway (AC will come on more often otherwise, even without my rack).

If it works for you, I’ve found running some things as a VM works better than dealing with windows.

Admittedly I have a lot of hardware due to what I do, but I’ve got (multiple, but just one is relevant in this case) proxmox server set up with an extremely tightened up windows 10 build. I’ve removed pretty much everything humanly possible on the windows side, just installing enough for the applications I need.

I then have a GPU that’s passed through to it directly (that machine is headless otherwise). So I’m getting all the GPU acceleration, but without using anything else on Windows, it stays slim and trim so it runs pretty well, and it’s pretty light on ram use.

With the second DP input of my monitor, I come off a video switcher but you can skip that and go right off the GPU. Now you’ve got a lightweight little VM directly connected to your display. Pass through your USB device of choice (I’m assuming a controller here, but you can use a second keyboard/mouse or USB host switch if you want).

Personally I find this approach easier since I don’t have to deal with all the memory gobbling nonsense on the windows side, I get to do my daily work in Linux, and specialty stuff that I just can’t run in wine stays readily available.

BMD bought Resolve maybe 15 years ago now, but the support is not limited to BMD hardware. It was more of a way for them to ensure BMD hardware support in a video editor at the time. Personally I have their web presenter and an older model of their TV studio kit at home (long story), but I also have a variety of other hardware, all of which works just fine with Resolve.

I’m using Resolve on the regular for my VHS conversions, though some tasks would be easier with the premium instead of the free version, I just fill in with ffmpeg or other tools and move on.

Just FYI, the download will ask for an email/name/etc, but the download starts right away, so you don’t need to actually give any PII out to get it.

I’ve used resolve for quite a few things in the past. It’s an excellent editor, way more than most people will need/use in the free version, and exceeds most corporate editing requirements in the paid version.

Blackmagic Design bought it to have a video editing suite they could tie to their hardware, which I would call similar in design approach. It’s inexpensive for what it does, works really well, but isn’t the top of the line for broadcast.

Most corporate broadcast (think like a bank or something having its own small recording studio, rather than the major broadcasting companies) will leverage BMD at some point in their workflow.

Yep… It’s permanently where it’s at at purchase.

Which is fine, I don’t store anything on there (Jenkins automations to build, local git repo on another machine, output goes to NAS), but it’s ridiculous how much the upgrades cost.

If I didn’t need a build target for iOS I wouldn’t have bothered with it, that’s for sure.

Or a mini.

I have an M2 mini I use for iOS builds, cheap enough for me to buy and stick in the rack to use for remote builds. I got that a year ago for $600ish iirc.

Bigger number sounds better for the ISP.

Honestly stencils are best for that.

For nginx - https://github.com/NginxProxyManager/nginx-proxy-manager/blob/develop/docker/rootfs/etc/nginx/conf.d/include/block-exploits.conf

That’s what is enabled when you check that box.

So a few comments…

• I’m not a fan of Ubuntu server, in part because their distribution of docker through snap can conflict with snap from the docker repo. My preference here is either Debian or Proxmox (debian + great virtualization setup). Mint is good, though I like LMDE (Debian edition) more, in part because I prefer Debian in general.
• You may want to check out dockge. You do need to have docker running for it, but it’s a simple setup, and it has a clean interface for docker compose. Good for getting used to it imo.
• grub has no part in docker, so it’s something else hanging.
• What are the exact errors when you enter “docker-compose up”?
• what is in your docker-compose for each of these?

I’d second this, if only because it’s super easy to run things on and OP explicitly said they don’t want to tinker with it. There is a limited list, imo, of buy and forget.

That’s said, I personally think a cheap little 4th gen or higher Intel based tiny/mini/micro would do a way better job on the services side, and just store on the NAS.