linuxgator

Nice. Though I think I actually used FreeCAD.

I printed one for a blender using tpu a few years ago after my cat got the original. Still seems to work just fine.

Better icon here… https://upload.wikimedia.org/wikipedia/commons/thumb/e/e7/Pixelfed_logo_multicolor_(September_2018).svg/1280px-Pixelfed_logo_multicolor_(September_2018).svg.png

In my experience, Me was far worse than Vista, and 8 was more just annoying than anything. Sound cards were nearly impossible to use in Me.

Why didn’t they just call it GemenAI?

Thought it was a new distro. Now I’m disappointed.

Someone will put the AppImage in AUR

Make sure all of the parts of your hotend are tightened. Especially where the Teflon tube ends. I set up a new printer once and it was having similar issues and it ended up the nozzle wasn’t fully tightened and was getting plugged up in the small gap. Changed the nozzle, cleaned the plugged material out, and made sure everything was tight, and it started printing just fine. Most PLA should print well at 200.

run0 reboot

Jessica Jones has definitely made some questionable decisions in her life, but Windows?!?

Well that’s LAME

You only need 1.21 gigawatts to go back to the future in a Delorean.

Hopefully it’ll help.

Cura has an option called “print thin walls” I was unable to print and smaller text without it enabled. But when it was enabled, things looked pretty good.

Just wait until you realize where the world alphabet comes from.

Then you call it Musl/Linux.

I usually see it referred to as GNU/Linux. I always consider Android as Android/Linux to differentiate it from desktop.

Someone once commented that it’s the one thing in Australia that won’t kill you. The same can’t be said about North American scorpions.

Definitely

They misspelled typo