CybermatrixV2

Working on irrigation to all corners of my piece of land. Digging meters and meters and putting HDPE pipe connectors with water sockets. Digging is heavy work but I needed a workout actually

Wauw, that’s quite a setup. Nevermind the state of things, there is always room for improvements. First is that it works. Your intake of solar is quite low compared to your battery size. Are you also aiming for more solar and bigger inverter then? Otherwise it will take days to fill 18kwh.

I am also aiming for a ton of water to be heated, both firewood and solar but have to rebuild the sauna stove for that. To have both stone and water as thermal storage. The stone I aim to also feed with cold in the summer. But I have to think more on that as condens forming is something risky.

Hi poVoq, how is your solar solution holding up after 2 years?

Hi, I am very curious on your inverter / battery setting as you said the heatpump is powered by solar. Do you have a hybrid setting or do you have batteries that buffer for the heatpump. As a heatpump is quite some power and needs to have a stable power supply

Ps, living not far from you (Lithuania) and I am interested to built these fence panels for the winter as well.

I have studied the drying of fruits for my work. To get optimal drying the temperature should be 45-60degC with an airflow in it. Of course this design would work but the fruits will take 3 days before the moisture content is around 10%> The design would need a bit more solar surface and a small fan to make the evaporation go faster and exchange the humid air. But it will be a bit more complex though. Small chimney would also work

Ah, that sucks 1 step forward and back at the start

Installing electricity lines are always finicky and cost me also a lot of effort. I understand your procrastination. Last week I have separated installing electricity lines by one line per evening (really one box and a line + the other side button/socket). And this helped greatly in overcoming the great effort of fixing stuff after work and dinner. The streak eventually ends and this week Factorio had me snatched up unfortunately.

They were not dying to find out, I hope?

The same here, thinking of how to make a door in wooden interior for electric installation has gotten me almost insane. So many choices. And then comes the hinges, do I use the ones I have for recycling or new, hiding the hinges but that means more complexity. There is not much space and all I use are 2,5x5cm wood lengths. It required quite some though processes if it is not standardized. Also I’m too shoddy and impatient for nice clean sharp finish. Luckily this style is consistence though.

I’ll try to share some pictures as that adds to the depth of the conversation