If anyone else is on the same situation what helped me find a new one is this site
There you can check pricing of several registrars for your domain and choose the one that you want and then you can see how to transfer to the chosen one.
Are the lines on the side of the print or on the top? Do they appear always on the same spots?
Try printing small callibration pieces, to see if it always happens
https://www.thingiverse.com/thing:4707289 https://www.tableflipfoundry.com/3d-printing/the-cones-of-calibration-v3/
From the picture it seems that you need to change your fep sheet. When you look at the fep does the lines coincide with the marks it has?
I have a domain with godaddy that renews very soon. Is it posible to migrate it to another registrar?
The durability comes with the design and the material used. As I said on another comment the first version was very fragile and was bending with barely any weight on it.
After adding a bracket to hold the glass in between it keeps its form even with food on top. It all depends on how you design the piece and in which direction you print. Not always the easiest way to print is the best for durability.
At the beginning I had several issues. If I remember correctly first I has to level the front part, then mark the distance with a wedge and have that same distance on the back.
For this it is important that when you’re adjusting the Y0 check on both edges and in the middle. It should be the same height overall
Once it’s leveled you need to adjust the Y offset until it sticks, for this you can print a zigzag pattern and it should stick equally well everywhere.
I remember I had saved some videos that explain that let me find them. Also the discord community is helpful for this particular printer
Yes, it looks better than I expected. I will seal it later to prevent bacterial growth as someone suggested here
Had to make a second version because the one on the post was too fragile. It was bending with just the glass. The new one looks like this
Yeah didn’t tought of that, do you think epoxy resin is enough?
Got wrong the 6 and 3.
On 6 the water seems like it was painted by a brush, was it an upscaling issue?
I see radicale recomended, but in what ways is it better than nextcloud? I moved to nextcloud for calendar due to syncing issues when sharing calendars. So far it seems to be fine, but this question got me wondering about what can be done better.
The only thing I’ve found that bothers me is that to add someone to the event he needs to also have nextcloud otherwise it gets weird.
Thats great news, i’ve been using joplin for years without knowing about Joplin server
I read it as “sandpaper i made in a blender” and thought that its somehow recycled sandpaper